Open Time: Monday to Friday 7 AM - 4:30 PM

  • Call Us

    (855) 552-5502

  • Send us mail

    sales@klcautoequip.com

  • Ask A Question
Quick Pull Collision Bench

Quick Pull Collision Bench

Quick Pull, An in-stall bench with light duty pulling capabilities With a lowered height of 4 inches off the floor Quick Pull does not need access ramps or side runners making it the perfect in-stall lift. Simply drive over the platform, swing the lift arms out and raise the vehicle to the optimum working height for the task being done. When the job requires a light or medium pull Quick Pulls 5 ton pulling arm is there to do the job, keeping sheet metal and other light duty pulling operations in the stall and off of the frame bench.

Read More »
Koala Collision Bench

Koala Collision Bench

Koala is easy on the budget and big on profits! Koala is the small straightening bench with great versatility and potential. Suitable for all situations, Koala can handle most of the structural work your shop will see.

Read More »
Evolution Collision Bench

Evolution Collision Bench

Evolution Jig Bench is the economical solution for those repairs where a mini-bench is not enough. With 5 crossbeams, loading ramp package and the D257 Fixture Set, it has all the hardware needed for the 8 points holding that OEMs require when a new design vehicle is structurally straightened. A 4.5m ( 14.75 ft.) bench thats ideal, taking up a smaller footprint without sacrificing repair capabilities.

Read More »
Mobile System Collision Bench

Mobile System Collision Bench

Mobile System, a reference point for the OEM The Globaljig System mobile bench has long been considered the top of its category. It is the equipment that has changed the perceptions of mobile benches. Equipped with the Globaljig Universal Fixturing System that allows centering of the vehicle after it is fixed to the jigs it can save up to 75% of the time required to load a vehicle.

Read More »
Super Rotax Collision bench

Super Rotax Collision bench

Super Rotax is Absolute Perfection! Super Rotax offers effortless loading with removable ramps for unlimited access to the vehicle, as well as 360-degree, 10-ton pulling. The bench provides 5’9 of uninhibited working height with 11,000 lbs. of lifting capacity. It is compatible with electronic measuring.

Read More »

Collision Benches

COLLISION BENCHES – PRECISION WITH OUTSTANDING ACCURACY

Think of auto collision benches and frame racks as two different animals within the same species. Benches hold a vehicle in alignment and allow you to position parts and pieces of the vehicle back within the alignment of the bench. With a bench you setup holding points that become specific measuring reference points. These points allow you to then make incremental adjustments in small areas to bring damaged pieces back to specs. A bench has measurement scales running down the platform and along the crossbeams to reference all repairs.

This works very differently than a frame rack where you hold the vehicle to the deck and then make pulls in various directions to bring the entire structure into form. A bench could be used to repair a unibody vehicle frame rail replacement; where a frame rack would be used to align overall damage within the entire structure of a framed vehicle.
Chief’s full line of Globaljig benches offer you an affordable solution to making repairs on a variety of vehicles. Couple this with our Global Scan and the variety of fixtures offered and you have all the collision repair equipment needed for your shop.

Super Rotax Features

Unlimited Pulling Angles
Universal Jig System
Six Cross Beams
Upper Body & Side Measuring
Removable Loading Ramp System
Self Centering Loading Package

COLLISION BENCHES For full 12 point repairs covering all models with no additional upgrades. Equipped with a 10 ton pull post that glides 360 degrees around its platform. Super Rotax is Absolute Perfection! Super Rotax offers effortless loading with removable ramps for unlimited access to the vehicle, as well as 360-degree, 10-ton pulling. The bench provides 5’9 of uninhibited working height with 11,000 lbs. of lifting capacity. It is compatible with electronic measuring.

COLLISION BENCHES Super Rotax tilts to allow fast and easy loading of vehicle. Put a vehicle into 4 sill clamps and you’re ready to pull in about 15 minutes. When 8-point holding or full fixturing is required, the user-friendly Globaljig Universal Jig makes it fast and efficient. The Super Rotax system comes standard with the full Globaljig Universal Jig (12 pts) with storage cart, the McPherson Overhead Measuring Bridge, loading ramps, loading stands, winch and one pulling tower fitted with accessories. Some customers choose to flush mount this bench so there’s even easier access to the work platform.

360 degree 10 ton pull/push towers
Locking Crossbeams
High performance scissor lift structure
Optional full frame holding clamps available
5.75 feet of working height

Contact us.

Body Shop Tools

Privacy Policy - Terms and Conditions